DSM-520 US model with PAL TV system

D-Link specific stuff goes here
Post Reply
Posts: 5
Joined: Mon Dec 10, 2007 6:45 am

DSM-520 US model with PAL TV system

Post by kalda01 » Tue Dec 11, 2007 12:15 am

Is it possible to change the output signal on a US DSM-520 to PAL color system ?

Posts: 48
Joined: Mon Oct 15, 2007 7:17 pm

Post by Toxic » Tue Dec 11, 2007 7:04 am

http://www.twonkyforum.com/viewtopic.ph ... 8&start=50

2nd post on that page. you will just need to enable telnet then change the NTSC setting.
Regards Simon
Synology CS-407 Firmware: 2.0 - 0726 : Drives: 4 x Samsung HD501LJ SATA II 500GB RAID5 : Xbox360

Post Reply