Noxon audio Client no longer supported by release 4.4.9 / 11
-
- Posts:6
- Joined:Fri Jan 02, 2009 3:18 pm
- AV Hardware:QNAP TS-209 incl. Twonky Media 4.4.9
Noxon audio
TG-100
Noxon audio Client not even longer supported by release 4.4.9 ?
I use TwonkyMedia Server on a QNAP TS-209 NAS and since update to newest Firmware including Twonky 4.4.9 my Noxon audio Client doesn´t play any longer mp3 or wma "provided" by Twonky.
I didn´t found any error in the log of Twonky (see below).
Rebuild of Database of Twonky 4.4.9 doesn´t fix the issue.
Music can still be played on PC via Browser or via TG-100 Streaming Client.
To verify that Twonky 4.4.9 is the cause I setup Twonky 4.4.9 on my old linux Server and got the same issue.
in both case I can navigate to the title to play, when choosing to play the title Noxon audio shows only the message "Connect..." and nothing more happens.
If in Twonky the option "internet radio" is configured it´s still possible to play Internet Radio station provided and streamed via Twonky.
Using Twonky 4.4.4 (the last version I have for tests) doesn´t show this issue.
The previous Twonky 4.4.6 on QNAP TS-209 doesn´t show this issue too.
Today I tested the new 4.4.11 Twonky and it has still the same issue as 4.4.9 with Noxon Audio (v1).
Additionaly (on V 4.4.9) I tried:
- Change the Media Receiver type trying different generic types (e.g.Generic DLNA 1.0) -> issue still exists
- delete and rebuild Media Receiver list -> issue still exists
- try to play an Album instead of a title -> issue still exists
Does anyone have a clue for it?
In parallel I opened a Support Case at Twonky Vision.
sample from TwonkyServer log of connection and try to play music with Noxon audio:
14:54:55:157 LOG_CLIENT_DB:The entry found in known clients list is already validated (ip=192.168.0.5)
14:54:55:157 LOG_CLIENT_DB:checking http header for entry ip=192.168.0.5, mac=
14:54:55:158 LOG_CLIENT_DB:Checking http header to find a matching client.db entry (ip=192.168.0.5)
14:54:55:158 LOG_CLIENT_DB:Ignoring client already matched by DD (ip=192.168.0.5)
14:54:55:159 LOG_HTTP:HTTP_send_receive GET /disk/music/O1$16$73688471$1013215635$744781501$2758170531.mp3 HTTP/1.0
Host: 192.168.0.3:9000
User-Agent: WinampMPEG/2.8
Accept: */*
Icy-MetaData: 1
Connection: close
I use TwonkyMedia Server on a QNAP TS-209 NAS and since update to newest Firmware including Twonky 4.4.9 my Noxon audio Client doesn´t play any longer mp3 or wma "provided" by Twonky.
I didn´t found any error in the log of Twonky (see below).
Rebuild of Database of Twonky 4.4.9 doesn´t fix the issue.
Music can still be played on PC via Browser or via TG-100 Streaming Client.
To verify that Twonky 4.4.9 is the cause I setup Twonky 4.4.9 on my old linux Server and got the same issue.
in both case I can navigate to the title to play, when choosing to play the title Noxon audio shows only the message "Connect..." and nothing more happens.
If in Twonky the option "internet radio" is configured it´s still possible to play Internet Radio station provided and streamed via Twonky.
Using Twonky 4.4.4 (the last version I have for tests) doesn´t show this issue.
The previous Twonky 4.4.6 on QNAP TS-209 doesn´t show this issue too.
Today I tested the new 4.4.11 Twonky and it has still the same issue as 4.4.9 with Noxon Audio (v1).
Additionaly (on V 4.4.9) I tried:
- Change the Media Receiver type trying different generic types (e.g.Generic DLNA 1.0) -> issue still exists
- delete and rebuild Media Receiver list -> issue still exists
- try to play an Album instead of a title -> issue still exists
Does anyone have a clue for it?
In parallel I opened a Support Case at Twonky Vision.
sample from TwonkyServer log of connection and try to play music with Noxon audio:
14:54:55:157 LOG_CLIENT_DB:The entry found in known clients list is already validated (ip=192.168.0.5)
14:54:55:157 LOG_CLIENT_DB:checking http header for entry ip=192.168.0.5, mac=
14:54:55:158 LOG_CLIENT_DB:Checking http header to find a matching client.db entry (ip=192.168.0.5)
14:54:55:158 LOG_CLIENT_DB:Ignoring client already matched by DD (ip=192.168.0.5)
14:54:55:159 LOG_HTTP:HTTP_send_receive GET /disk/music/O1$16$73688471$1013215635$744781501$2758170531.mp3 HTTP/1.0
Host: 192.168.0.3:9000
User-Agent: WinampMPEG/2.8
Accept: */*
Icy-MetaData: 1
Connection: close
NAS: QNAP TS-209 incl. Twonky Media 4.4.9
Client: Noxon audio, TG-100
Client: Noxon audio, TG-100
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
With 4.4.9 and 4.4.11, my Noxon 2 works ok but it is identified in the client list in Twonky as noxon audio v1. If I reset it to Noxon audio 2 and save, it appears to save ok but it always later reverts to v1.
John
John
- mgillespie
- Posts:1222
- Joined:Fri Jul 08, 2005 1:19 pm
- AV Hardware:TwonkyMedia AV UPnP Mediaserver (Marvell Kirkwood ARM Sheevaplug with Debian Squeeze).
2x Noxon V2 audio client
1x PS3 Slim 500GB Audio/Video UPnP client.
1x Sony VGF-CP1 Wireless Photoframe. - Location:UK
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
Mine too, I don't know if its because both Noxon1 and Noxon2 identify themselves the same. But I too don't have any issues, so I don't lose sleep over it. Perhaps to keep it simple, the clientsDB entry should be Noxon1/Noxon2 !!!qnapuser wrote:With 4.4.9 and 4.4.11, my Noxon 2 works ok but it is identified in the client list in Twonky as noxon audio v1. If I reset it to Noxon audio 2 and save, it appears to save ok but it always later reverts to v1.
John
Looking at the ClientsDB entries for each, it seems the only difference is Noxon2 accepts UTF8 text, Noxon1 does not. So that means if oyu have UTF8 tags, and it's detected incorrectly. they may not show.
Actually it seems the clientDB is out of date, certainly with the latest Noxon beta firmware, as it identifies itself as "NOXON 2", but the entry is "NOXON2". Changing the string in the clients.db makes it detect the Noxon2 correctly for me.
Will report this as a bug.
Please note: Moderators here are voluntary and do not work for PacketVideo or Twonky, please do not attack us. Any posts are personal opinion, and may not be those of PV/Twonky.
-
- Posts:8
- Joined:Mon Mar 16, 2009 5:43 pm
- AV Hardware:Noxon Audio version 1
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
I accidently upgraded to version 4.4.11
Can anyone tell me where to download a version 4.4.6
Thankx......
I'm looking for a linux version
Update : Never mind: I see I can download it from the site .....
Update 2 : I just installed version 4.4.6, but it still hangs on "Connecting..."
Any help?
Can anyone tell me where to download a version 4.4.6
Thankx......
I'm looking for a linux version
Update : Never mind: I see I can download it from the site .....
Update 2 : I just installed version 4.4.6, but it still hangs on "Connecting..."
Any help?
-
- Posts:6
- Joined:Fri Jan 02, 2009 3:18 pm
- AV Hardware:QNAP TS-209 incl. Twonky Media 4.4.9
Noxon audio
TG-100
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
bastiaan2003 wrote: .....
Update 2 : I just installed version 4.4.6, but it still hangs on "Connecting..."
Any help?
Hello bastiaan2003. I am surprised that your Noxon 1 has this issue when using Twonky 4.4.6. This version was from my experience one of the best Twonky Server and I never detected any issue on my Noxon 1.
Do you use it on Linux? I assume.
Is the permissions on the Linux Filesystem correct? This was a failure I made in the past.
Does the Internet Radio that is streamed by Twonky, not the "Noxon built-in", work?
This are just the first and more simple steps I tested in the past.
Regards
Matthias
NAS: QNAP TS-209 incl. Twonky Media 4.4.9
Client: Noxon audio, TG-100
Client: Noxon audio, TG-100
-
- Posts:8
- Joined:Mon Mar 16, 2009 5:43 pm
- AV Hardware:Noxon Audio version 1
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
Hi,
Yes, I am using Linux.
I gave my MP3's full rights (777) so that isn't the problem.
Also, I can't play internet radio though Twonky. I can play internet radio directly.
That the only thing I can do.
It does play using TwonkyMedia for Windows (trial version)
I'm really out of options now.... ;-(
Yes, I am using Linux.
I gave my MP3's full rights (777) so that isn't the problem.
Also, I can't play internet radio though Twonky. I can play internet radio directly.
That the only thing I can do.
It does play using TwonkyMedia for Windows (trial version)
I'm really out of options now.... ;-(
-
- Posts:6
- Joined:Fri Jan 02, 2009 3:18 pm
- AV Hardware:QNAP TS-209 incl. Twonky Media 4.4.9
Noxon audio
TG-100
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
Hello bastiaan2003,
I am just comparing my configuration to yours and also thinking about other options to test/verify:
my whole Music Folder (on Linux Server) also has permissions 0777, same for the subfolder (= Artist) and Album Subfolder. Only the mp3 file has 0766.
I don´t see any problem here.
Did you already tried to access to Twonkys Files via Webbrowser on your PC?
The URL is like this: http://<IP of your Server>:9000/webbrowse
Here you also can play the Music, Video etc. To be honest I expect the same issue as on the Noxon audio.
Twonky Server has -opened in the Webbrowser- in the left vertical Menu the last Item "Maintenance". Here you can select different options to check issues. Maybe this supports your further analysis.
And last but not least:
On the Twonky Server Page in the Browser you have at the upper and more to the right side the "i" in a circle, clicking on it provides some information e.g. content the server has scanned.
I assume here is your Media folder(s) no of title, videos etc. visible and correct?
These are just suggestions that allow to check the Twonky Server. I use it since Version 4.3 and on two different hardware (both Linux OS) and all of them ran perfect. And I am not a Linux or Twonky expert.
Regards
Matthias
I am just comparing my configuration to yours and also thinking about other options to test/verify:
my whole Music Folder (on Linux Server) also has permissions 0777, same for the subfolder (= Artist) and Album Subfolder. Only the mp3 file has 0766.
I don´t see any problem here.
Did you already tried to access to Twonkys Files via Webbrowser on your PC?
The URL is like this: http://<IP of your Server>:9000/webbrowse
Here you also can play the Music, Video etc. To be honest I expect the same issue as on the Noxon audio.
Twonky Server has -opened in the Webbrowser- in the left vertical Menu the last Item "Maintenance". Here you can select different options to check issues. Maybe this supports your further analysis.
And last but not least:
On the Twonky Server Page in the Browser you have at the upper and more to the right side the "i" in a circle, clicking on it provides some information e.g. content the server has scanned.
I assume here is your Media folder(s) no of title, videos etc. visible and correct?
These are just suggestions that allow to check the Twonky Server. I use it since Version 4.3 and on two different hardware (both Linux OS) and all of them ran perfect. And I am not a Linux or Twonky expert.
Regards
Matthias
NAS: QNAP TS-209 incl. Twonky Media 4.4.9
Client: Noxon audio, TG-100
Client: Noxon audio, TG-100
-
- Posts:8
- Joined:Mon Mar 16, 2009 5:43 pm
- AV Hardware:Noxon Audio version 1
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
Hello,
My folders AND my files all have 777 security. I had Fedora Core 5 running and never had a problem. Then I switched to Ubuntu 8.10 and now nothing wont play anymore. I just installed (VMware Fedora Core 10) and there the music wont play.
If I go to the webbrowser and play the music, it does play, so TwonkyServer is working a little bit
Matthias, yours is working, right? Which linux distro do you use?
Tomorrow I'm going to install Fedora Core 5 again (VMWare) and try it again on this distro.
Bastiaan
My folders AND my files all have 777 security. I had Fedora Core 5 running and never had a problem. Then I switched to Ubuntu 8.10 and now nothing wont play anymore. I just installed (VMware Fedora Core 10) and there the music wont play.
If I go to the webbrowser and play the music, it does play, so TwonkyServer is working a little bit
![Smile :)](./images/smilies/icon_smile.gif)
Matthias, yours is working, right? Which linux distro do you use?
Tomorrow I'm going to install Fedora Core 5 again (VMWare) and try it again on this distro.
Bastiaan
-
- Posts:6
- Joined:Fri Jan 02, 2009 3:18 pm
- AV Hardware:QNAP TS-209 incl. Twonky Media 4.4.9
Noxon audio
TG-100
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
Hello
my both Linux Distro are very special.
1. Eisfair (a german project for a simple Linux based server)
2. QNAP TS 209 (uses a QNAP customized Linux)
I also have the Eisfair in a VMWare. This allows quickly to test the different Twonky Server version (e.g. 4.4.4, 4.4.6 etc). I have them all there.
If you can play titles provided by Twonky in your Webbrowser the issue shouldn´t be located at Twonky side otherwise it won´t play here too.
I assume you use a Windows client and IE or Firefox as Webbrowser. Are you sure that the Music file streamed by Twonky and played in the Webbrowser (precisely it´s Windows Media player) is a mp3 title? sorry to ask this "stupid" question but sometimes it can play a role.
Or is there an issue with the mp3 File(s) (coding etc) that Noxon don´t play them but Windows Media Player does?
The current infos about the issue look like this.
Regards
my both Linux Distro are very special.
1. Eisfair (a german project for a simple Linux based server)
2. QNAP TS 209 (uses a QNAP customized Linux)
I also have the Eisfair in a VMWare. This allows quickly to test the different Twonky Server version (e.g. 4.4.4, 4.4.6 etc). I have them all there.
If you can play titles provided by Twonky in your Webbrowser the issue shouldn´t be located at Twonky side otherwise it won´t play here too.
I assume you use a Windows client and IE or Firefox as Webbrowser. Are you sure that the Music file streamed by Twonky and played in the Webbrowser (precisely it´s Windows Media player) is a mp3 title? sorry to ask this "stupid" question but sometimes it can play a role.
Or is there an issue with the mp3 File(s) (coding etc) that Noxon don´t play them but Windows Media Player does?
The current infos about the issue look like this.
Regards
NAS: QNAP TS-209 incl. Twonky Media 4.4.9
Client: Noxon audio, TG-100
Client: Noxon audio, TG-100
-
- Posts:8
- Joined:Mon Mar 16, 2009 5:43 pm
- AV Hardware:Noxon Audio version 1
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
Today, I even tried Fedora Core 5. This has alway worked, except I can't recall which version of TwonkyMedia I always used.
But I'm quite sure it has to do with TwonkyMedia in combinaton with Noxon now. TwonkyMedia on my Windows Vista machine works with Noxon and with Vista Windows Media player.
TwonkyMedia on my linux machineS wont work with my Noxon, but does work with Windows Media player.
Can anyone please provide me with an older version of TwonkyMedia, so I can rule that out too.
Older version is 4.4.4 or 4.4.6...
Thanx in advance,
Bastiaan
My e-mail address is bastiaan at duijnhouwer dot com
But I'm quite sure it has to do with TwonkyMedia in combinaton with Noxon now. TwonkyMedia on my Windows Vista machine works with Noxon and with Vista Windows Media player.
TwonkyMedia on my linux machineS wont work with my Noxon, but does work with Windows Media player.
Can anyone please provide me with an older version of TwonkyMedia, so I can rule that out too.
Older version is 4.4.4 or 4.4.6...
Thanx in advance,
Bastiaan
My e-mail address is bastiaan at duijnhouwer dot com
-
- Posts:6
- Joined:Fri Jan 02, 2009 3:18 pm
- AV Hardware:QNAP TS-209 incl. Twonky Media 4.4.9
Noxon audio
TG-100
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
Hi Bastiaan,
I just send you via PM the Twonky Server 4.4.6 for Linux and a link to a download source if you need one for Windows.
The 4.4.6 should work sufficient. Never had any issue with this version compare to 4.4.9 and older version.
Regards
Matthias
I just send you via PM the Twonky Server 4.4.6 for Linux and a link to a download source if you need one for Windows.
The 4.4.6 should work sufficient. Never had any issue with this version compare to 4.4.9 and older version.
Regards
Matthias
NAS: QNAP TS-209 incl. Twonky Media 4.4.9
Client: Noxon audio, TG-100
Client: Noxon audio, TG-100
-
- Posts:8
- Joined:Mon Mar 16, 2009 5:43 pm
- AV Hardware:Noxon Audio version 1
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
Thanks for version 4.4.6
This version also don't work for me.
I am starting to believe this has something to do with my Noxon Audio.
One other possibillity is that this has something to do with my wireless router.
I recently changed this to a FritzBox Fon.
But that doesn't explain why the Windows version of TwonkyServer does work.
I even tried to put my MP3 on a Windows share (in Linux)
This wasnt helpful either.
Today I asked Twonky for support.
One more thing I'm gonna try is hand my Noxon over to a friend of me. He will try it as his network / linux server.
Thanks for all the good thinking...
I will let it know here.
Bastiaan
This version also don't work for me.
I am starting to believe this has something to do with my Noxon Audio.
One other possibillity is that this has something to do with my wireless router.
I recently changed this to a FritzBox Fon.
But that doesn't explain why the Windows version of TwonkyServer does work.
I even tried to put my MP3 on a Windows share (in Linux)
This wasnt helpful either.
Today I asked Twonky for support.
One more thing I'm gonna try is hand my Noxon over to a friend of me. He will try it as his network / linux server.
Thanks for all the good thinking...
I will let it know here.
Bastiaan
-
- Posts:8
- Joined:Mon Mar 16, 2009 5:43 pm
- AV Hardware:Noxon Audio version 1
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
YES ! IT WORKS !!
Only version 4.4.4 works for me. Any higher version wont work with my Noxon.
Thank you so much Matthias !
I will try newer versions again tomorrow....![Wink ;-)](./images/smilies/icon_wink.gif)
Only version 4.4.4 works for me. Any higher version wont work with my Noxon.
Thank you so much Matthias !
I will try newer versions again tomorrow....
![Wink ;-)](./images/smilies/icon_wink.gif)
- mgillespie
- Posts:1222
- Joined:Fri Jul 08, 2005 1:19 pm
- AV Hardware:TwonkyMedia AV UPnP Mediaserver (Marvell Kirkwood ARM Sheevaplug with Debian Squeeze).
2x Noxon V2 audio client
1x PS3 Slim 500GB Audio/Video UPnP client.
1x Sony VGF-CP1 Wireless Photoframe. - Location:UK
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
have you tried 4.4.14?
http://www.twonkyforum.com/viewtopic.php?f=24&t=6303
Also make sure you have the multicast route setup.
from the LinuxHowto.txt
http://www.twonkyforum.com/viewtopic.php?f=24&t=6303
Also make sure you have the multicast route setup.
from the LinuxHowto.txt
Make sure that the server file, plugins and the cgi scripts have the exe bit set.
If not, try:
"chmod 700 twonkym* cgi-bin/* plugins/*"
Eventually it is necessary to have a multicast route set for the
server by issuinge, e.g.:
"route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0"
Please note: Moderators here are voluntary and do not work for PacketVideo or Twonky, please do not attack us. Any posts are personal opinion, and may not be those of PV/Twonky.
-
- Posts:8
- Joined:Mon Mar 16, 2009 5:43 pm
- AV Hardware:Noxon Audio version 1
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
Version 4.4.14 is NOT working for my Twonky Audio v1 also.
So far only version 4.4.4 IS working correct...
So far only version 4.4.4 IS working correct...
-
- Posts:3816
- Joined:Wed Nov 19, 2008 1:59 am
- AV Hardware:Samsung 650 Series TV (2010), 4.5TB HP MediaSmart server with 100,000 songs, 5) AT&T U-Verse STB, CE form-factor Media Center PC and 6 other networked PCs running TwonkyManager, 2 Sonos ZP80, Sonos S5 speaker, Apple TV (running XBMC), Roku Soundbridge, X-Box 360, Sony PS3, Kodak 10" Wireless Photo Frame, iPhone with PlugPlayer software, Sonos CR-100.
- Location:San Diego
- Contact:
Re: Noxon audio Client no longer supported by release 4.4.9 / 11
Good news. I think this problem may have been fixed. According to the engineer who looked into this, the string was correct in 5.0, but in 4.4.15 there was "," in the entry, which caused problems with the config page. This problem has been corrected in TwonkyMedia 4.4.16. I'll make a request to get this posted here in a few days, so you can test this.
- Rick
- Rick
Follow me on Twitter! mostlytech1
Checkout my blog: http://mostly-tech.com/
Checkout my blog: http://mostly-tech.com/