not the correct time with FW 2.20 in movies

Discuss Twonky and PS3 here
Post Reply
Thunder2001
Posts:4
Joined:Tue Mar 25, 2008 8:57 pm
AV Hardware:Linkstation Pro / PS3
not the correct time with FW 2.20 in movies

Post by Thunder2001 » Tue Mar 25, 2008 9:14 pm

Hello,

i use Twonkey on a Linkstation NAS and a PS3 to show movies was converted with mkvtovob. Is an gread program to make x264 files in a vob format. After install of the new FW 2.20 is the timecode totally brocken. On every movie is the timecode 20 or 99:99 h. Before with FW 2.10 was the timecode correct. A nother problem is the start of some movies after 30-40s. The fact is, with TVersity i have no probs with this thinks. I have tested the newest version and an older version. Can you guys check this?

Thanks!

Thunder2001

Thunder2001
Posts:4
Joined:Tue Mar 25, 2008 8:57 pm
AV Hardware:Linkstation Pro / PS3

Re: not the correct time with FW 2.20 in movies

Post by Thunder2001 » Wed Apr 16, 2008 11:32 am

Hello,

the same problem with the PS3 FW 2.30 and Twonkey but the start problem is not longer present.

PS3 2.17 >> Twonkey 4.4.4 OK / correct time at m2ts files
PS3 2.20 >> Twonkey 4.4.4 No / Show only 99.99.59 time at m2ts files (but TVersity show correctly)
PS3 2.30 >> Twonkey 4.4.4 No / Show only 99.99.59 time at m2ts files (but TVersity show correctly)

Then i copy the file to the hard disk the time code is fine.

Is a problem of the combination from Twonkey 4.4.4 and the newer PS3 FW.

Is it possible to fix it in a newer Twonkey version? Because i think is an only problem with this streaming client.

bizniss
Posts:15
Joined:Fri Feb 08, 2008 1:37 pm

Re: not the correct time with FW 2.20 in movies

Post by bizniss » Wed Apr 16, 2008 8:12 pm

I can confirm that I'm getting the same problem since 2.20 and 2.30

Thunder2001
Posts:4
Joined:Tue Mar 25, 2008 8:57 pm
AV Hardware:Linkstation Pro / PS3

Re: not the correct time with FW 2.20 in movies

Post by Thunder2001 » Fri Apr 25, 2008 11:52 am

Any Idee for this problem? I think is a important feature to see the correct time of the movie and not 99.59.59.

MikaVee
Posts:1
Joined:Mon Jul 07, 2008 2:06 am
AV Hardware:D-Link DNS-323 NAS
PS3 @ FW 2.36
PS3Toothfairy #5
Logitech Harmony 555
Yamaha AV Receiver (DD)
Sony KDL-46D3500 FullHD

Re: not the correct time with FW 2.20 in movies

Post by MikaVee » Mon Jul 07, 2008 4:45 pm

I have PS3 with FW 2.36 and D-Link DNS-323 with Twonky 4.4.5 and there is same problem with the times. I use .m2ts which are coming from tsMuxer. It shows almost everytime the lenght as 596:31'22'' in the list and 99:59.59 on info when playing.
Any news for this problem? Any ideas?

Guys from Twonky? Should this be fixed?

EdTo
Posts:1
Joined:Mon Jul 28, 2008 10:58 pm
AV Hardware:CH3SNAS twonky 4.4.5
PS3
PC
Pinnacle Soundbridge

Re: not the correct time with FW 2.20 in movies

Post by EdTo » Mon Jul 28, 2008 11:01 pm

I have the same problem with FW 2.41.
But when i copy the m2ts file to the ps3's local harddrive it works OK, the problem is there only with streaming.


Eddie

Thunder2001
Posts:4
Joined:Tue Mar 25, 2008 8:57 pm
AV Hardware:Linkstation Pro / PS3

Re: not the correct time with FW 2.20 in movies

Post by Thunder2001 » Tue Aug 19, 2008 7:07 am

Hello,

its me again. ;) I think the problem is not no small and i hope a developer can give us a statement.

Best regards

Thunder2001

bizniss
Posts:15
Joined:Fri Feb 08, 2008 1:37 pm

Re: not the correct time with FW 2.20 in movies

Post by bizniss » Wed Aug 20, 2008 2:38 pm

I can also confirm that with Sony FW 2.41 and Twonky 4.4.6 I'm still getting times of 99:99:59 for m2ts files. Incidentally the same files display the correct times on MediaTomb 0.11 so I think the problem lies with Twonky rather than Sony

Jehuty
Posts:3
Joined:Tue Sep 09, 2008 11:26 am
AV Hardware:PS3
Buffalo Linkstation Live

Re: not the correct time with FW 2.20 in movies

Post by Jehuty » Sun Sep 14, 2008 6:25 pm

Same here. The Time isn´t the Problem for me but the Fast forward isn´s working so fast.

Mfg Jehuty

Post Reply