Unfotunately this didn't help also.
Here is my full Config with x'ed sensitive information.
Thank you for your help!
#! Twonky ini file / charset UTF-8
#! Change settings by commandline or by editing this file
#! Do not add space characters before or after equal sign!
[main]
# Visible name in the network
friendlyname=xxx
# Comma separated list of IP addresses to bind to (optionally can include a netmask e.g. 192.168.3.0|255.255.255.0 will match address range 192.168.3.x). Default: blank = all networks
ip=xxx
# Watch changes in machine's network conf (1: yes, 0: no)
nicrestart=1
# Verbose level for logging
v=4095
# Compile platform
platform=powerpc_341_225
# Port of the http server
httpport=
# TTL for SSDP packets. Default: 4
ssdpttl=4
# Timeout for theSSDP heartbeat thread. Default: 100 ms
ssdpheartbeattimeout=100
# clear detected clients table on each restart
clearclientsonrestart=0
# disable SSDP on localhost
disablelocalssdp=0
# enable https remote connections
enabletls=0
# Log level (0:debug, 1:trace, 2:info, 3:warning, 4:error, 5:critical)
vlevel=4
# Stack size in bytes per thread on Linux. Default: 196608
stack_size=196608
# 2 letter language setting (en,de,...)
language=de
# UserID Please Do NOT change it manually
userid=xxx
# AppID unique ID for TSDK based application, stored inside DTCP secure contents
appid=
# Portal username Please Do NOT change it manually
portalusername=Utgardus
# twonky info for Media Feeds Please Do NOT change it manually
twonkyinfo=xxx
# enable NMC Queue Handler Device
enablequeuehandlerdevice=0
# enable NMC Web API
enablenmcwebapi=1
# follow symbolic links while scanning (Linux only)
followlinks=0
# flush log messages
flushlogmsg=0
# Webdav Port
webdavport=
# Comma separated list of IP addresses to explictly exclude (optionally can include a netmask e.g. 192.168.3.0|255.255.255.0 will match address range 192.168.3.x)
ignoreip=
# URL location for downloading device database updates
autoupdateurl=
# media type filter for non local clients, values are: A (all,default) | M | P | V | m | p | v | X (non)
mediatypefilter=A
# bitfield to specify what is reported to the portal: 1 (devices), 2 (library size), 4 (local playback), 8 (beaming)
enablereporting=0
# optional <appid> added to reports to the portal
reportingappid=
# Port number for the SSDP heartbeat. Default: 1900
ssdpheartbeatport=1900
# for Linux/NAS systems this is the basedirectory used for content sharing (prepended to all shares)
contentbase=/
# Specifies a comma separated list of network interfaces to bind to (example eth0,ra0 etc). Check ifconfig -a to get list of interfaces
iface=
# Specifies a comma separated list of interface names to ignore
ignoreiface=
# Maximum number of cuncurently running threads (in thread pool); 0- no limit
maxthreads=0
# Name of the online service; default NULL is equivalent to "Online Services"
onlineservicename=
# Expire peristent devices inactive for more than this period (in days) (0 to suppress expiry)
pdbexpiretime=14
# URL to a web application for the online services configuration
profileserviceurl=
http://profile.twonky.com
# directory for cached/transcoded files
cachedir=/var/twonky/twonkyserver/db/cache
# max space files take under the directory for cached/transcoded files
cachemaxsize=
# Maximum allowed time (in hours) for MAC address to be stored in cache,0-disable MAC caching
maccacheleasetime=24
# Enables Friendly Info Update Service for dynamic friendlyname and icon update.
enablefriendlyinfoupdate=
# Enables deprecated web interfaces /feed/json and /feed/rss. Application developers should use /nmc/rss and /nmc/rss?fmt=json instead
enabledeprecatedjsonandrssfeed=
# limit device description responses to particular user agent only
limit_devdesc_responses_ua=
# limit device description responses to particular IP address
limit_devdesc_responses_ip=
# ignore inotify file create events
ignore_inotify_file_create=0
# process scan queue only if unchanged for n seconds
scan_queue_delay=0
# use queue when scanning folders
queue_on_folder_scan=0
# for protection of the web config pages
accessuser=
# for protection of the web config pages
accesspwd=
# license key
cdkey=
# auto enable new detected clients
clientautoenable=1
# default codepage used for ASCII to UTF-8 conversions
codepage=932
# music files under this directory are handled as part of a compilation
compilationsdir=Compilations,Sampler
# CSV list of all shares, prepended by the type (A,M,P,V) and a '+' or '-' sign to flag enabled or disabled shares
contentdir=+M|/shares/xxx,+V|/shares/xxx,+A|/shares/xxx,-M|/xxx,-M|/shares/xxx,+M|/shares/xxx,+M|/shares/xxx,+M|/shares/xxx,+M|/shares/xxx,+M|/shares/xxx,+M|/shares/xxx,+M|/shares/xxx,+M|/shares/xxx
# directory where metadata database is stored
dbdir=/var/twonky/twonkyserver/db
# dynamic dns prefix for remote access, including http://
dyndns=
http://xxx.myfritz.net/
# access to web config pages, 0 for denied, 1 for local only, 2 for open
enableweb=2
# http server port for remote access
httpremoteport=9100
# ignore this directory for scanning (can be a comma separated list)
ignoredir=AppleDouble,AppleDB,AppleDesktop,TemporaryItems,.fseventsd,.Spotlight-V100,.Trashes,.Trash,RECYCLED,RECYCLER,RECYCLE.BIN
# full path to the iTunes library .xml file, empty to disable iTunes import
ituneslib=
# -1 for evented, 0 for disabled, positive value for rescan time in minutes
scantime=-1
# buffer size in bytes used for streaming
streambuffer=16384
# enable content upload
uploadenabled=1
# directory where uploaded songs are stored, if not specified server will use default name based on servermanagedmusicdir property
uploadmusicdir=
# directory where uploaded pictures are stored, if not specified server will use default name based on servermanagedpicturedir property
uploadpicturedir=
# directory where uploaded videos are stored, if not specified server will use default name based on servermanagedvideodir property
uploadvideodir=
# directory where server store mirrored songs, if not specified server will use default name based on servermanagedmusicdir property
mirroredmusicdir=
# directory where server store mirrored photos, if not specified server will use default name based on servermanagedpicturedir property
mirroredpicturedir=
# directory where server mirrored videos, if not specified server will use default name based on servermanagedvideodir property
mirroredvideodir=
# default location where server managed music folders are stored, like uploaded and mirrored songs, subfolder names are created based on strings from language files
servermanagedmusicdir=/twonky/music/Twonky
# default location where server managed picture folders are stored, like uploaded and mirrored photos, subfolder names are created based on strings from language files
servermanagedpicturedir=/twonky/pictures/Twonky
# default location where server managed video folders are stored, like uploaded and mirrored videos, subfolder names are created based on strings from language files
servermanagedvideodir=/twonky/videos/Twonky
# default view for clients
defaultview=advanceddefault
# removable media drives
rmdrives=
# removable media home drive
rmhomedrive=/var/twonky/twonkyserver/db
# auto share removable media
rmautoshare=0
# maximum items that the server will share
maxitems=0
# enable aggregation of other DLNA servers
aggregation=0
# default aggregation mode for new discovered servers (0:ignore, 1: aggregate, 2:mirror)
aggmode=0
secure_folder_path=
# enable remote access
remoteaccess=1
# maximum number of DTCP sessions running at one time
dtcpsessionlimit=8
# Absolute path to file with DTCP session count
dtcpsessioncount=
# The friendly name for upload location in a recording server
uploaddestinationfriendlyname=UploadDestination
# comma separated list of DLNA profiles that shall only be accepted on upload
uploadrestrictedprofiles=
# bitfield to disabled specific server frontends like HTML or RSS, use (1=HTML, 2=RSS, 4=JSON, 8=FLASH)
disablefrontends=
# maximum number of simultaneous CreateObject sessions, set 0 or negative for unlimited
upnpuploadlimit=0
# set to 1 to prevent server entering sleep mode
disablesleepmode=0
# comma separated list of maximum uploaded file size in megabytes for Photo, Music and Video contents, set 0 for unlimited
uploadmaxfilesize=0,0,0
# maximum number of sessions (upload/download/streaming) running at one time
httpsessionlimit=
# clear the cache on each restart of the server
clearcacheonrestart=
# specifies the maximum image size in pixels the scaler can handle
scalermaxpixels=
# minimum interval between two consecutive recordings (in seconds)
hdrlnextreadyvalue=180
# enable non-keyframe mode for generating time-seek-table
enablenonkeyframetstgen=0
# specify additional folder where server looks for .import.items files
importdir=
# set to 1 to disable the mytwonky subnodes
disablemytwonky=0
# set to 1 to include the folder name of the shares in the 'By Folder' navigation
includefolder=0
# add and share itunes lib
rmadditunes=0
# allow upload to removable media
rmupload=0
# bitfield to enable/disable content discovery methods (1=Shared Folder Enumeration, 2=File System Events, 4=Import Items File)
contentdiscoverymode=7
# RemoteUI Server functionality (0:disable RUIS (default), 1:CEA2014 RUIS, 2:HTML5 Lite RUIS, 3:HTML5 Main RUIS)
enableruiserver=0
# set to 1 to disable time seek generation
disabletimeseek=0
# directory for albumart files
albumartdir=
# File System Eventing Test Required (1:Yes, 0:No)
fseventingtest=0
# set to 1 to disable duplicate removal algorithm
disableduplicateremoval=0
# content folder will be ignored if it contains any files in this list
ignoredirwithfile=.nomedia,.ignorethis
# Force a database update at startup (skipped by default with scantime=0)
forceinitialscan=0
# username for protection of accessing classified videos
classifiedaccessuser=
# password for protection of accessing classified videos
classifiedaccesspwd=
# The TwonkyTuner's network host adress, under the form "IP.IP.IP.IP"
twonkytuner_host=127.0.0.1
# The TwonkyTuner's http port
twonkytuner_port=
# Set .import files polling interval in seconds (default=60)
importscantime=
# set to 1 to limit transcoding processes to one per client IP address
limittranscodingperclient=0
# disable scaling of JPEG images encoded with progressive mode
disablepmscaling=0
# Timeout for file scanner watchdog thread (-1 to disable). Default: 250ms
scannerwatchdogtimeout=
# Timeout for file scanner notify thread (-1 to disable). Default: 250ms
scannernotifychecktimeout=
# Timeout for DB notify check timeout (-1 to disable). Default: 250ms
dbnotifychecktimeout=
# Timeout for checking shutdown signal in threads: Default: 100ms
shutdownchecktimeout=
# Comma separated list of paths to ignore. All content under these paths will be ignored
ignoredirsbeginningwith=
# Disable the .unsupported marker for failed transcoding attempts
disableunsupportedmarker=0
# If this set to 1 server will work only on localhost until file scanner ready
delaynetwork=0
# If this set to 1 server will provide DTCP content only to clients with DT flag in client adaptation
disabledtcp=0
# If this set to 1 server will not use only MPEG-TS and MP4 but all content-formats for DTCP. If toggled REBUILD is needed to update DLNA profiles of MPEG files.
dtcp_use_all_content=1
# Cut smart playlists at this date, if set. Format is CCYY-MM-DD[Thh:mm:ss].
smartplaylistcutdate=
# If this set to 1 server will not share WM DRM protected files.
donotscandrm=0
# When total amount of memory used exceeds this value then no additional contents will be shared
memsharinglimit=0
# Specify location of FUN files. Setting this property enables FUN files scanning.
fun_file_location=
# Specify FUN files scan interval in seconds, -1 to use file events
fun_scaninterval=0
# Always share the servermanaged/upload directories - if set to 0 the upload directories need to be located within another active share
autoshare_upload_dirs=1
# Disable albumart fallback per content type (0-all enabled,1-disable music,2-disable video)
disablealbumart_fallback=0
# Ignore embedded thumbnails when selecting the input for picture scaling (1 ignore them, 0 use them - default)
ignore_embedded_thumbnails=0
# Specify the path of remoteui server index html file (relative to remoteui-html folder)
ruiserverindexhtml=
# Presentation URL of device
presentation_url=
# Set to non-zero to disable persistent connections, zero (default) to use them
no_persist_conn=0
# Initial interval in s between MSearches. 0 to use normal interval. Default: 3
msearch_start_interval=3
# Interval in s between MSearches. 0 to disable. Default: 0
msearch_interval=0
# Poll interval for DMR state changes of broken renderers in s. -1 to disable. Default: 5
dmr_state_poll_interval=5
# Client cache size limit. Default: 1048576
client_cache_size_limit=1048576
# MAX QUEUE SIZE. Default: -1
max_queue_size=-1
# Operation mode of RemoteUI Client. 1: CEA2014 RUIC, 2: HTML5 (Lite) RUIC, 3: HTML5 (Main) RUIC. Default: 3
ruic_mode=3
# Interval to poll RCS for devices which not sending events properly. Default: 30sec
rcs_poll_interval=30
# Location of the thumbnail cache. Default: tncache
thumbnail_cache_dir=tncache
# Storage type (Memory / Disk) to use for thumbnail cache. Default: M
thumbnail_cache_storage_type=M
# Maximum size to be used for the thumbnail cache size in bytes. Default: 1048576
thumbnail_cache_size=1048576
# Number of thumbnail cache threads. Default: 1
thumbnail_max_threads=1
# Auto enable new detected control points. Default: 1
cpautoenable=1