Twonky Forum

The following scenario, I guess, is not uncommon:

• Harddisk hybernation on the NAS is a must! During nighttime we all sleep and during 5 days a week we are at work/in school.
  When the kids have added some music to the drive, they obviously would like to verify its there and hear it right away on the clients.

Presently (using ver 4.3) it is not possible to set up the NAS hibernation and Mediaserver rescan time to support such functionality.

It would be highly appreciated to have such scenario supported !

(In effect, this is probably one of the ideas of "re-scan time = -1" ?)

it is supported

rescantime -1 and inotify systems does this

otherwise set scantime to 0 and use manual scan

Yes, hoped it did, but when I try to set the rescan time to -1 on my server (ver. 4.3 running on a Synology 106j) the server seems to 'forget' the entered value.

Manual rescan is not an option - don't want to ask (or permit) my kids to enter the administration interface of the server.

Any ideas?

sorry what is inotify?

"inotify is a Linux kernel subsystem that provides file system event notification" (quote of wikipedia).

But as Twonkyvision server user one should not be concerned with this or .. ?

Is it required to activate "inotify" somehow?

if -1 rescan defaults back to 60, then it's because you don't have the correct version of iNotify in your kernel.

Apparently, there are 2 types of iNotify interface, the standard Linux kernel interface is different to the interface that Twonky supports..

I did post about this a while back, search the forums for iNotify. I hope it gets fixed in the near future...

As I am running the TwonkyVision server on a Synology NAS, I am not in control of which inotify daemon (?) the server runs. And yes, when I try to set the re-scan time to -1 it reverts to 60.

So, I now wonder if what mgillespie is actually saying, is that the TwonkyVision software is not fully compatible with the Linux running on the Synology NAS.

Any comment from Twonky would be welcome. Would it be possible to extend the MediaSerer SW to be compatible with various inotify versions in order to make the auto rescan work on Synology

nope

- it is true that Linux has so many differnet ways with and without inotify and even with inotify there are two versions....

overall - if the server defaults to 60 the system it is running on just has not the right version of inotify

nothing we can do there - you need to use the other scantgime settings than (e.g. 0 for enabling the sleep mode)

Hi Christian,

Now that the new version of inotify is embedded in the later 2.6 linux kernels and apparently does not use or create /dev/inotify would it be possible for Twonky to now look at supporting this method of new file detection, as this is the way things appear to be moving.

I gleened this info from ( http://www.unixadmintalk.com/f59/why-do ... fy-130708/ ) and indeed I have checked that inotify is installed on my linkstation running latest 2.6 kernel and the /dev/inotify instance is no longer created.

Regards

Indeed, the latest inotify is by far the most common. It's disappointing to see Twonky only supporting the deprecated version