TwonkyMedia Server not working properly with Freecom NDPRO

General discussion about the media server. Feature requests. Hints, tips and tricks.
Locked
JustAnotherUser
Posts:3
Joined:Fri Apr 03, 2009 12:51 pm
AV Hardware:FREECOM NETWORK DRIVE PRO
TwonkyMedia Server not working properly with Freecom NDPRO

Post by JustAnotherUser » Fri Apr 03, 2009 1:04 pm

Hi all,

I have a FREECOM NETWORK DRIVE PRO (500GB) NAS DEVICE and it comes with TwonkyMedia Server. Anyways, it was working fine for the first couple of weeks (with a PlayStation 3). However, now when I go to Basic Setup -> Sharing -> Content Locations - I cannot change any of the values. The values are blank, as you can see in the attached screenshot (and below).
Sharing.png
Screenshot of part of my problem with TWONKY MEDIA SERVER.
Sharing.png (104.18KiB)Viewed 1924 times
When I try to change them, or save any changes - to ANY part of the media server configuration, none of the values are changed. I have tried a database re-scan, but no luck for that either. I would rather not reset the hard drive, as then it would take a long time to put the stuff back on it (and I don't want this problem to occur again)! I have attached another screenshot with the "Info" part of the configuration - please feel free to ask if you need any more screenshots of any other bits. If I need to upgrade my version, I'd appreciate if you could explain to me how to do so - as I can only use Windows / Mac (not PuTTY and Linux)!

Oh yeah, I can't use the logging bit (because of the problem I stated). But some other statistics:
  • TwonkyMedia version -> 4.4.2
    Server hardware -> Freecom Network Drive Pro 500GB (NAS DEVICE)
    Operating System -> Linux I think
    If you are running as a system service (Windows only) -> Nope
    Client(s) and their software version -> Umm? Only the PS3 uses the Media Server ATM
    Type(s) of media you are having problems with -> All media, I can't choose any folders
    How many files you have in your database -> In the files I want to scan, 1.48 GB music = ~300 files, 31.2 GB pictures = ~10,800 files.
    Network type (Wired/Wireless) -> Hard Drive is connected via Wired, but PS3 is Wireless, other computers in network are wired / wireless.
I await your reply! :)
Attachments
info.png
The "Info" part of the configuration.
info.png (9.92KiB)Viewed 1914 times

JustAnotherUser
Posts:3
Joined:Fri Apr 03, 2009 12:51 pm
AV Hardware:FREECOM NETWORK DRIVE PRO

Re: TwonkyMedia Server not working properly with Freecom NDPRO

Post by JustAnotherUser » Tue Apr 07, 2009 4:17 pm

Fixed the problem - talked to Freecom - I had to downgrade the firmware from the 4.4.8 Beta version to the 4.4.2 stable version! :D

Locked