I've set all relevant settings in Twonkys INI-file - at least I think so. But I can't access my Twonky server from remote locations. All links were translated into local IP address (e.g. http://myaccount.dyndns.org:9000 ends in http://192.168.178.32:9000). My router is set correct:
# enable https remote connections
enabletls=0
# dynamic dns prefix for remote access, including http://
dyndns=http://myaccount.dyndns.org
# access to web config pages, 0 for denied, 1 for local only, 2 for open
enableweb=2
# http server port for remote access
httpremoteport=9000
# enable remote access
remoteaccess=1
# flash as default media browser for remote access
remoteaccessflash=0
Any help is highly appreciated because I would like to buy a license soon.
Can't remote access TwonkyServer
-
- Posts:3816
- Joined:Wed Nov 19, 2008 1:59 am
- AV Hardware:Samsung 650 Series TV (2010), 4.5TB HP MediaSmart server with 100,000 songs, 5) AT&T U-Verse STB, CE form-factor Media Center PC and 6 other networked PCs running TwonkyManager, 2 Sonos ZP80, Sonos S5 speaker, Apple TV (running XBMC), Roku Soundbridge, X-Box 360, Sony PS3, Kodak 10" Wireless Photo Frame, iPhone with PlugPlayer software, Sonos CR-100.
- Location:San Diego
- Contact:
Re: Can't remote access TwonkyServer
You've probably already seen this, but there are some suggestions here to consider:
http://www.twonkyforum.com/viewtopic.ph ... 646#p32846
- Rick
http://www.twonkyforum.com/viewtopic.ph ... 646#p32846
- Rick
Follow me on Twitter! mostlytech1
Checkout my blog: http://mostly-tech.com/
Checkout my blog: http://mostly-tech.com/
-
- Posts:70
- Joined:Thu Dec 29, 2005 4:20 am
- AV Hardware:Windows Vista
2 Playstation 3's
1 Retired DSM-320 - Location:Syracuse, NY
- Contact:
Re: Can't remote access TwonkyServer
Here are a couple things that I've done. I've been able to access Twonky through Plug Player and Firefox over the web and am looking forward to Twonky .
Try adding the port number to your dyndns line:
dyndns=http://yoursubdomain.dyndns.org:2345
(EDIT: I just found on phibertron's excellent twonky .ini guide, he says NOT to add the port number here. I'd pay more attention to him than to me on this one.)
I think that the :9000 port is reserved for LAN usage. I could be totally wrong about that and don't care. Use a different series of four digits that are easy to remember.
Duplicate that port number on the httpremoteport line.
httpremoteport=2345
I hope that helps. Twonky is a good program, even if it's frustrating at times.
Dave
Try adding the port number to your dyndns line:
dyndns=http://yoursubdomain.dyndns.org:2345
(EDIT: I just found on phibertron's excellent twonky .ini guide, he says NOT to add the port number here. I'd pay more attention to him than to me on this one.)
I think that the :9000 port is reserved for LAN usage. I could be totally wrong about that and don't care. Use a different series of four digits that are easy to remember.
Duplicate that port number on the httpremoteport line.
httpremoteport=2345
I hope that helps. Twonky is a good program, even if it's frustrating at times.
Dave
Re: Can't remote access TwonkyServer
It's working now. Thanks to you all.
First of all I had to include the port in the dyndns URL. After that everything worked as expected.
In addition I changed the remote port from 9000 to 9100. It worked with 9000 even with remote access - but it was slower.
First of all I had to include the port in the dyndns URL. After that everything worked as expected.
In addition I changed the remote port from 9000 to 9100. It worked with 9000 even with remote access - but it was slower.
-
- Posts:3816
- Joined:Wed Nov 19, 2008 1:59 am
- AV Hardware:Samsung 650 Series TV (2010), 4.5TB HP MediaSmart server with 100,000 songs, 5) AT&T U-Verse STB, CE form-factor Media Center PC and 6 other networked PCs running TwonkyManager, 2 Sonos ZP80, Sonos S5 speaker, Apple TV (running XBMC), Roku Soundbridge, X-Box 360, Sony PS3, Kodak 10" Wireless Photo Frame, iPhone with PlugPlayer software, Sonos CR-100.
- Location:San Diego
- Contact:
Re: Can't remote access TwonkyServer
Great news. Glad we were able to help.
- Rick
- Rick
Follow me on Twitter! mostlytech1
Checkout my blog: http://mostly-tech.com/
Checkout my blog: http://mostly-tech.com/