Samsung no media found

Post Reply
edgalvan@aol.com
Posts: 2
Joined: Thu Sep 30, 2010 4:32 am
AV Hardware: samsung 55c8000
twonky server 6.0.23
mac book

Samsung no media found

Post by edgalvan@aol.com » Thu Sep 30, 2010 4:40 am

i have a samsung 55c8000 led 3d tv, verizon fios wireless internet, twonky server 6.0.23, and macbook pro. i have media on and all devices are allowed on the samsung but when i press content and go to media play i get : no external storage device found. check the connection status. what am i doing wrong?

PeeBee
Posts: 392
Joined: Sat Jun 13, 2009 12:16 pm
AV Hardware: Buffalo LS Pro; PS3; Samsung LE37B650

Re: Samsung no media found

Post by PeeBee » Thu Sep 30, 2010 7:52 pm

Does this help from the sticky post just above yours?

http://www.twonkyforum.com/viewtopic.php?f=26&t=8468

PB
Samsung LE37B650T2WXXU; Liteon 5055GDL+ HDD/DVD Recorder; Playstation 3; Iomega Screenplay HD 500GB; Buffalo Linkstation Pro LS-320GL (running Twonky 6.0.30, SqueezeBox Server 7.6 and acting as a Print Server)

edgalvan@aol.com
Posts: 2
Joined: Thu Sep 30, 2010 4:32 am
AV Hardware: samsung 55c8000
twonky server 6.0.23
mac book

Re: Samsung no media found

Post by edgalvan@aol.com » Fri Oct 01, 2010 1:18 am

yes i tried all that, all the settings are as stated. it connected one day and the next day i could not get it to connect again.

PeeBee
Posts: 392
Joined: Sat Jun 13, 2009 12:16 pm
AV Hardware: Buffalo LS Pro; PS3; Samsung LE37B650

Re: Samsung no media found

Post by PeeBee » Fri Oct 01, 2010 4:24 pm

Is the TV being identified correctly in the Media Reveivers page of the Twonky Config web page?

Also try resetting your receivers list and then restarting your server from the Maintenance page while the TV is on and connected to the network. It should then re-appear in the list as Samsung TV with the correct IP and MAC addresses.

PB
Samsung LE37B650T2WXXU; Liteon 5055GDL+ HDD/DVD Recorder; Playstation 3; Iomega Screenplay HD 500GB; Buffalo Linkstation Pro LS-320GL (running Twonky 6.0.30, SqueezeBox Server 7.6 and acting as a Print Server)

Post Reply