Twonky 4.4.11 and a Netgear Readynas NV+

Everything about the Netgear support, problems, hints...
Post Reply
Posts: 1
Joined: Fri Jun 12, 2009 9:16 pm
AV Hardware: Linn DS, Netgear Readynas NV+

Twonky 4.4.11 and a Netgear Readynas NV+

Post by pdcman » Fri Jun 12, 2009 9:30 pm

Hi folks, I wonder if someone can help a newbie.

To cut a long story short, I used to use 4.4.4 (Netgear Build) with my NAS. I had to rebuild the NAS and reload my music fom the backup.

In the process, I obviously lost Twonky. I have downloaded 4.4.11 but don't seem able to install it. Isn't there supposed to be an exe file to click??

As it was over a year ago when I installed th original Twonky, I forgot how I did it.
Any help would be greatly appreciated.



User avatar
Posts: 478
Joined: Thu Jan 03, 2008 8:07 pm
AV Hardware: Linn Klimax DS
Linn Majik DS-I
Linn Sneaky DS
WDTV Live Hib
Sonos 80
Location: Edinburgh, Scotland

Re: Twonky 4.4.11 and a Netgear Readynas NV+

Post by Briain » Sat Jun 13, 2009 11:37 am


Open Frontview in your browser (http://your.nas.ip.address/admin) or, use RAIDar to find the NAS, select it and select setup.

User name will be admin and password will be netgear1 (unless you changed it)

Select (on left) System, then select update, then select the 'local' tab.

Then you can browse to the bin file and select Upload and verify image.

Then perform the update.

Hope that helps

Post Reply