Hi folks, I wonder if someone can help a newbie.
To cut a long story short, I used to use 4.4.4 (Netgear Build) with my NAS. I had to rebuild the NAS and reload my music fom the backup.
In the process, I obviously lost Twonky. I have downloaded 4.4.11 but don't seem able to install it. Isn't there supposed to be an exe file to click??
As it was over a year ago when I installed th original Twonky, I forgot how I did it.
Any help would be greatly appreciated.
thanks
Phil
Twonky 4.4.11 and a Netgear Readynas NV+
- Briain
- Posts:478
- Joined:Thu Jan 03, 2008 8:07 pm
- AV Hardware:Linn Klimax DS
Linn Majik DS-I
Linn Sneaky DS
WDTV Live Hib
Sonos 80 - Location:Edinburgh, Scotland
Re: Twonky 4.4.11 and a Netgear Readynas NV+
Hi
Open Frontview in your browser (http://your.nas.ip.address/admin) or, use RAIDar to find the NAS, select it and select setup.
User name will be admin and password will be netgear1 (unless you changed it)
Select (on left) System, then select update, then select the 'local' tab.
Then you can browse to the bin file and select Upload and verify image.
Then perform the update.
Hope that helps
Bri
Open Frontview in your browser (http://your.nas.ip.address/admin) or, use RAIDar to find the NAS, select it and select setup.
User name will be admin and password will be netgear1 (unless you changed it)
Select (on left) System, then select update, then select the 'local' tab.
Then you can browse to the bin file and select Upload and verify image.
Then perform the update.
Hope that helps
Bri