Install Linkstation 2 (mips)

MikeThomson · Post by **MikeThomson** » Mon Dec 10, 2007 6:18 pm

Where can i download the installfiles from twonky for the linkstation 2 (mips)?

Is there any install howto?

thanks a lot.

serial · Post by **serial** » Mon Dec 10, 2007 7:00 pm

check out the thread below â€¦ (Where's the NAS download link?)
There you'll find the installer for your hardware

MikeThomson · Post by **MikeThomson** » Tue Dec 11, 2007 5:34 pm

Thank you.

I have found the right link, but i cant install because i have only SSH access to my linkstation. The installer uses telnet.

Is there any installer with ssh support?

Or can anybody tell me how to reinstall telnet?

apt-get is not available

MikeThomson · Post by **MikeThomson** » Tue Dec 11, 2007 7:05 pm

After some experimenting i figured out how to restart telnet.

The installation works perfect. I recieved a 100% done message.

But if try to go to the config page: IP:9000 or IP:9000/configpage/index.html

it wont work. "The webpage could not be displayed"

a "ps aux" tell me that the mediaserver is running.

root 1 0.4 0.9 2172 604 ? S 22:06 0:02 init
root 2 0.0 0.0 0 0 ? SW 22:06 0:00 [keventd]
root 3 0.0 0.0 0 0 ? SWN 22:06 0:00 [ksoftirqd_CPU0]
root 4 0.0 0.0 0 0 ? SW 22:06 0:00 [kswapd]
root 5 0.0 0.0 0 0 ? SW 22:06 0:00 [bdflush]
root 6 0.0 0.0 0 0 ? SW 22:06 0:00 [kupdated]
root 9 0.0 0.0 0 0 ? SW 22:06 0:00 [mtdblockd]
root 10 0.0 0.0 0 0 ? SW 22:06 0:00 [khubd]
root 15 0.0 0.0 0 0 ? SW 22:06 0:00 [kjournald]
root 63 0.0 0.0 0 0 ? SW 22:06 0:00 [kjournald]
root 186 0.0 1.0 3376 680 ? S 22:07 0:00 /usr/sbin/dropbear -d /etc/dropbear/dropbear_dss_host
root 199 0.0 1.1 2476 708 ? S 22:07 0:00 /sbin/syslogd -m 0
root 205 0.0 0.8 7156 536 ? S 22:07 0:00 /usr/local/EPKowa/printer/ekpd
root 212 0.0 0.9 2948 612 ? S 22:07 0:00 /usr/sbin/ls_servd -i eth0
root 216 0.0 1.5 3268 984 ? S 22:07 0:00 /usr/sbin/thttpd -C /etc/thttpd.conf
daemon 221 0.0 2.1 5832 1308 ? S 22:07 0:00 lpd Waiting
root 227 0.0 1.2 2480 744 ? S 22:07 0:00 /usr/sbin/cron
root 242 0.0 1.7 6296 1096 ? S 22:07 0:00 /usr/sbin/atalkd -f /etc/atalk/atalkd.conf
root 243 0.0 2.7 6768 1732 ? S 22:07 0:00 /usr/sbin/smbd -D
root 245 0.0 2.6 5224 1632 ? S 22:07 0:00 /usr/sbin/nmbd -D
root 249 0.0 1.3 4476 864 ? S 22:07 0:00 ftpd: accepting connections on port 21
root 255 0.0 1.6 4720 1036 ? S 22:07 0:00 /usr/sbin/pcastd
root 257 0.0 1.7 4720 1060 ? S 22:07 0:00 /usr/sbin/pcastd
root 263 0.0 0.8 2140 540 ? S 22:07 0:00 /usr/sbin/mc_ctld
root 270 0.0 0.8 2732 520 ? S 22:07 0:00 /mnt/hda/twonkyvision/twonkymedia
root 271 0.3 2.2 15900 1412 ? S 22:07 0:02 /mnt/hda/twonkyvision/twonkymediaserver
root 284 0.1 2.0 4300 1292 ? S 22:07 0:01 /usr/sbin/dropbear -d /etc/dropbear/dropbear_dss_host
root 286 0.0 2.5 4180 1608 pts/0 S 22:07 0:00 -bash
root 289 0.0 1.7 6612 1108 ? S 22:07 0:00 /usr/sbin/papd
root 291 0.0 2.1 7664 1324 ? S 22:07 0:00 /usr/sbin/afpd -c 1000 -n TLS
root 302 0.0 1.3 3932 844 pts/0 R 22:16 0:00 ps aux

But the twonkymediaserver-log.txt is empty:

***** LOG INIT *****
~

this is my twonkymedia-default.ini

contentbase=/mnt
contentdir=+A|/
friendlyname=Twonky Linkstation II
httpport=9000
enableweb=2
scantime=60
maxmem=40000
startupmb=0
platform=Linkstation II

the twonkyvision-mediaserver.ini isnt readable. There are only @@@@

Anybody an idea?

serial · Post by **serial** » Wed Dec 12, 2007 11:00 am

Hi.

It`s the same to me. Everthing works fine. The Twonky Mediaserver works in the network but I can not get up to the config page.
So the problem is that I installed a trial and I have no chance to insert my serial. So my fear is that after a period of 30 days my software won`t work.

Has anyone a suggestion where the failure might be or how the problem can be solved?