Can't make twonky work on Linkstation Live after update

Other OS or NAS discussions
Post Reply
cramcram
Posts: 2
Joined: Sun Feb 10, 2008 9:36 pm

Can't make twonky work on Linkstation Live after update

Post by cramcram » Sun Feb 10, 2008 9:49 pm

I upgraded the firmware on my Linkstation Live to 2.10. After the upgrade twonky stopped working (which didn't really surprise me). I tried installing the latest version (4.4.3.1). Although the install went okay and ps shows that twonkymedia and twonkymediaserver are running I can't access the config pages via web access.

The media server is apparently running but isn't sharing anything.

I tried down-reving to 4.4.2 (which had been previously working). It took some work since the installer expected files to be in /mnt/disk1/twonky but didn't seem to move them there. Anyway, it runs but fails to respond to web access as well.

Any suggestions?

Thanks,

Marc

cramcram
Posts: 2
Joined: Sun Feb 10, 2008 9:36 pm

Post by cramcram » Sun Feb 10, 2008 11:39 pm

Found it! I hadn't used the setup page in a while. I used the port # (9000) that the nassetup window listed. The twonky server is really sitting on port 9010.

oranges
Posts: 19
Joined: Tue Feb 19, 2008 5:57 am

Re: Can't make twonky work on Linkstation Live after update

Post by oranges » Sun Mar 02, 2008 6:31 pm

Hey,

Thanks! I was also looking for port 9000. :D

Post Reply