greating from DK.
How do I install Twonky on Synology DS207+
I need some simpel "how to do" advice to install Twonky on my Synology DS207+. The UPnP on the 207+ is not able to get my InternetRadio to work, but according to manufactor twonky should work. Hope somebody can guide me,
greating from DK.
greating from DK.
-
riethmueller
- Posts:11
- Joined:Fri Oct 03, 2008 12:53 pm
- AV Hardware:Twonky on XP + separate fileserver
Synology DS508
Roku M400
Roku M1000; 2xRoku 1001
Pure Sensia
Pure Evoke
Philips WAC7000
Philips WAS7000
Phillips WAK3300 - Contact:
Re: How do I install Twonky on Synology DS207+
Hello toboel,
try the new version 4.4.9, with this version the malefunction of InternetRadio is fixed.
Tom
try the new version 4.4.9, with this version the malefunction of InternetRadio is fixed.
Tom
Twonky Server (6.0.38) on XP + separate fileserver (Synology DS508); Roku M400; Roku M1000; 2xRoku 1001; Pure Sensia; Pure Evoke; Philips WAC7000; Philips WAS7000; Phillips WAK3300
Re: How do I install Twonky on Synology DS207+
Thank you "richtmueller". May I was not too clear in my opening question. What I need is a "How to install Twonky on a Synology DS207+ for Dummies " I have my PC with XP and a D-link DI 824VUP+ router.
Hope someone can give me a simpel "how to do" what do I need except for the rigth Twonky version for DS207+
" I have my PC with XP and a D-link DI 824VUP+ router.Hope someone can give me a simpel "how to do" what do I need except for the rigth Twonky version for DS207+
-
spe
- Posts:22
- Joined:Mon Jan 05, 2009 12:04 am
- AV Hardware:Synology 207+ NAS
Popcornhour A100
Hauppage MVP
Re: How do I install Twonky on Synology DS207+
Okay here goes - from memory - its pretty easy if you take it a step at a time...toboel wrote:Thank you "richtmueller". May I was not too clear in my opening question. What I need is a "How to install Twonky on a Synology DS207+ for Dummies
Hope someone can give me a simpel "how to do" what do I need except for the rigth Twonky version for DS207+
Go here... http://www.twonkyforum.com/unsupported/4.4.11/
Get the CS-407 version NOT the DS-207 version (CS-407 has similar chipset/hardware to DS-207+)
Go to the DS-207+ admin page, ensure that you have build 702 of the Synology firmware or later and enable telnet support.
Place the Twonky CS-407 package on a PC and follow the instructions in the packaging.
On the DS-207+ this broadly involves creation of a shared space on the DS-207+ drive for the installer to use. This is a "public" share.
When you first login as part of the install process you will need to prodvide the "root" login ID and password combination, this is not the "admin" login combination and you may have to create a root user in the DS-207+ before you can get started or the installer will fail.
When the DS-207+ is ready to receive its new copy of Twonky just run the Windows-based installer application and tell it where the DS-207+ is located on the network (IP address), the root name and password and let it do the rest.
After you've done it once future installations are completely painless, simply re-enable telnet on the DS and run the Windows installer. Its all done in a couple of minutes.
After installation the Twonky config is the same for all systems, but beware, if you have a large music or video collection it can take hours building the initial content database before you can see anything from your media streamer. Just be patient - it will work. You should work your way down the bars on the left hand pane and check all the config settings.
You should find the initial Twonky status at "http://<NAS IP ADDRESS>:9000/config"
Warning: when updating to later versions some of these get overwritten from time to time. So keep a note of the settings that you've used, and don't lose your Twonky registration/activation key.
Hope this helps.