I have an 1TB Iomega Home Network Media Storage device.
I used it for storage first, and then decided it would be useful to use TWONKY which is pre-installed on the systems - although I cannot see any files associated with this.
I can log into the webbrowser:
http://<IP>:9000/webbrowser
However there are no graphics and I cannot log into the /config or /setup ... it comes up with a red screen and tells me "Access is restricted to MediaServer configuration!"
I've read a few articles about this and I've tried: to create a twonky folder on the NAS server, I've tried to create a twonky folder on the ftp server, I've even tried adding folders "twonkymedia". I've then added a file "twonkyvision-mediaserver.ini" in the route of the twonky folders with the following two lines of code:
# Web access
enableweb=2
Alas nothing I do works. How to I get the images on the IOMEGA NAS and set up the config and setup pages
Hope someone can help .
Thanks
IND001
Iomega-09407A
-
- Posts:2
- Joined:Sat May 09, 2009 8:39 pm
- AV Hardware:iomega Storcentre ix2
imac 2.16
2 wire router
HP laptop
Re: Iomega-09407A
I just called iomega. There is definitely no way they can help us at this time. Sorry for the bad news. I have the same problem with an ix2
Re: Iomega-09407A
I don't know if it's any help, but you can get a full-graphics Twonky page from the Iomega Home Media Network Drive by going to http://<IP>:9000/webbrowse.