Hi
I am using twonky 4.4.11 on a Buffalo Linkstation Live. When ever I reboot the NAS it loses the Licence key and settings
(Navigation, share, name etc) this has been happening since 4.4 but was persevering until next release. No its here the problem remains
Does anybody know how I can set it so it does not lose this information, its starting to get annoying now
Thanks for any help in advance
Licence and settings lost on NAS reboot
Re: Licence and settings lost on NAS reboot
I have had no reply to this post, but I know other I having issue.
Is there a way I could change the attributes of the Twonky config file to read only, thus keeping the settings?
Does this seem like a sensible approach ?
Is there a way I could change the attributes of the Twonky config file to read only, thus keeping the settings?
Does this seem like a sensible approach ?
Re: Licence and settings lost on NAS reboot
I had similar problems,and worked-around as follows: Check your router and see which site Twonky is phoning'home to, block that site and delete the twonkymedia.ini (maybe called twonkyserver?) file.
Re: Licence and settings lost on NAS reboot
oh, so you think it is the router causing the reset of the twonkyvision-mediasever.ini file ?
strange how do I check what site my twonky is looking to block ?
strange how do I check what site my twonky is looking to block ?
Re: Licence and settings lost on NAS reboot
Ok what I have done so far, I have made the twonkyvision-mediaserver.ini immutable by
# chattr +i twonkyvision-mediaserver.ini
After 3 reboots and 1 shut-down cold restart the file remains untouched with all settings intact.
I will test it with the Xbox 360 later and report my findings
# chattr +i twonkyvision-mediaserver.ini
After 3 reboots and 1 shut-down cold restart the file remains untouched with all settings intact.
I will test it with the Xbox 360 later and report my findings
Re: Licence and settings lost on NAS reboot
The above fix has done the trick, all Licence details and config settings are saved. Connect to XBox is spot on even after serveral reboots, and an overnight shutdown.
Finally happy.
Finally happy.
-
- Posts:1
- Joined:Wed Feb 04, 2009 10:04 pm
- AV Hardware:zYXEL DMA1000
Netgear 4400
netgear EVA8000
Ps3
XBOX360
Re: Licence and settings lost on NAS reboot
Sabrerain wrote:Ok what I have done so far, I have made the twonkyvision-mediaserver.ini immutable by
# chattr +i twonkyvision-mediaserver.ini
After 3 reboots and 1 shut-down cold restart the file remains untouched with all settings intact.
I will test it with the Xbox 360 later and report my findings
*************************************************
Errrr im having same issue where/how do you type that command please ?
im using media server on a netgear readynas
-
- Posts:22
- Joined:Sun Oct 25, 2009 4:13 am
- AV Hardware:Dlink DNS-343
Dlink DGS-2208 Gigabit Router
XBox 360
Windows SBS - Location:California
Re: Licence and settings lost on NAS reboot
I know this is an old post, but I don't know much about modifying the settings and such as was described earlier. I too keep loosing my settings with a server reboot.
Anyone out there that can walk me through some "baby steps" to get this file modified as described above
Greatly appreciated!
Jason
Anyone out there that can walk me through some "baby steps" to get this file modified as described above
Greatly appreciated!
Jason