Running MP101 with RTP Option?
- mgillespie
- Posts:1222
- Joined:Fri Jul 08, 2005 1:19 pm
- AV Hardware:TwonkyMedia AV UPnP Mediaserver (Marvell Kirkwood ARM Sheevaplug with Debian Squeeze).
2x Noxon V2 audio client
1x PS3 Slim 500GB Audio/Video UPnP client.
1x Sony VGF-CP1 Wireless Photoframe. - Location:UK
So who's using RTP with their MP101? (The assumption is, if you are running it, it's working...)
-
- Posts:338
- Joined:Mon Jul 11, 2005 4:34 am
- Location:Sausalito,Ca. USA
- Contact:
-
- Posts:18
- Joined:Sat Aug 06, 2005 5:08 pm
- mgillespie
- Posts:1222
- Joined:Fri Jul 08, 2005 1:19 pm
- AV Hardware:TwonkyMedia AV UPnP Mediaserver (Marvell Kirkwood ARM Sheevaplug with Debian Squeeze).
2x Noxon V2 audio client
1x PS3 Slim 500GB Audio/Video UPnP client.
1x Sony VGF-CP1 Wireless Photoframe. - Location:UK
- mgillespie
- Posts:1222
- Joined:Fri Jul 08, 2005 1:19 pm
- AV Hardware:TwonkyMedia AV UPnP Mediaserver (Marvell Kirkwood ARM Sheevaplug with Debian Squeeze).
2x Noxon V2 audio client
1x PS3 Slim 500GB Audio/Video UPnP client.
1x Sony VGF-CP1 Wireless Photoframe. - Location:UK
To RTP or NOT to RTP
My Setup:
Full MediaServer 2.9 installed on Linksys NSLU2, Unslung v5.5 beta.
Wired network, Netgear MP101 with latest client firmware v1.3.7.
Netgear FM114P router.
RTP = 0:
Mostly OK, occassional periods of silence which sort them selves out if you wait, sometines serveral minutes. Can affect MP3 or WMA equally.
RTP = 1:
WMA format always breaks up, MP3 sometims breaks up.
This was the same when I ran MusicServer v2.8 on the NSLU2.
Currently running RTP = 0
Full MediaServer 2.9 installed on Linksys NSLU2, Unslung v5.5 beta.
Wired network, Netgear MP101 with latest client firmware v1.3.7.
Netgear FM114P router.
RTP = 0:
Mostly OK, occassional periods of silence which sort them selves out if you wait, sometines serveral minutes. Can affect MP3 or WMA equally.
RTP = 1:
WMA format always breaks up, MP3 sometims breaks up.
This was the same when I ran MusicServer v2.8 on the NSLU2.
Currently running RTP = 0
-
- Posts:9
- Joined:Sun Sep 11, 2005 3:52 am
- Location:Sunnyvale, CA
- mgillespie
- Posts:1222
- Joined:Fri Jul 08, 2005 1:19 pm
- AV Hardware:TwonkyMedia AV UPnP Mediaserver (Marvell Kirkwood ARM Sheevaplug with Debian Squeeze).
2x Noxon V2 audio client
1x PS3 Slim 500GB Audio/Video UPnP client.
1x Sony VGF-CP1 Wireless Photoframe. - Location:UK
-
- Posts:16
- Joined:Tue Dec 27, 2005 4:13 pm
RTP=0
My Setup:
Full MusicServer 3.0 installed on P4(2.4ghz) homebuilt PC.
Wireless network, Netgear MP101 with latest client firmware v1.3.7.
Actiontec wireless Cable/DSL router.
Kerio free firewall (on pc)
RTP = 0:
Play's radio streams great, no skips on Mp3's or WMA's either.
RTP = 1:
Won't stream some radio, some mp3's don't play or sometimes skip. Doesn't seem to affect WMA's.
RTP server port is set to 0 as well.
So to sumerize I am currently running RTP = 0
*Running Windows XP SP2
Full MusicServer 3.0 installed on P4(2.4ghz) homebuilt PC.
Wireless network, Netgear MP101 with latest client firmware v1.3.7.
Actiontec wireless Cable/DSL router.
Kerio free firewall (on pc)
RTP = 0:
Play's radio streams great, no skips on Mp3's or WMA's either.
RTP = 1:
Won't stream some radio, some mp3's don't play or sometimes skip. Doesn't seem to affect WMA's.
RTP server port is set to 0 as well.
So to sumerize I am currently running RTP = 0
*Running Windows XP SP2
Last edited by KingTurkish76 on Tue Dec 27, 2005 8:37 pm, edited 1 time in total.
- mgillespie
- Posts:1222
- Joined:Fri Jul 08, 2005 1:19 pm
- AV Hardware:TwonkyMedia AV UPnP Mediaserver (Marvell Kirkwood ARM Sheevaplug with Debian Squeeze).
2x Noxon V2 audio client
1x PS3 Slim 500GB Audio/Video UPnP client.
1x Sony VGF-CP1 Wireless Photoframe. - Location:UK
-
- Posts:2
- Joined:Fri Oct 31, 2008 4:09 pm
- AV Hardware:n5200 with twonkymodule ;netgear mp101; teac wap500; TG100
Re: Running MP101 with RTP Option?
well running an mp101 last official fw realease, wired to a fritzbox 7050 4 wlan purposes (Connection with the onboard wlan is not sufficiant) with a thecus n5200 (not pro) and the newest twonky 4 N5200(utilizing twonky Version 4.4.9).
Got crazy wit the breakdowns and the slow search. since I switched to RTP I had no breakdowns (so far 30 min), the search is quicker and the sound seems more present.
I´ll postpost if anyting changes my opinion.
Many thnxxxx for the tip
Got crazy wit the breakdowns and the slow search. since I switched to RTP I had no breakdowns (so far 30 min), the search is quicker and the sound seems more present.
I´ll postpost if anyting changes my opinion.
Many thnxxxx for the tip
-
- Posts:8
- Joined:Sun Sep 28, 2008 11:28 am
- AV Hardware:NSLU2 with Twonky 4.4.6
MP-101 + IPMicro (DNT)
Sony STR-DB840
Controlled via Harmony 880 :-)))))) Radio Streaming with one click. I Love it.
Re: Running MP101 with RTP Option?
Also only positive news,
NSLU2 with Twonky 4.4.6----------Fritzbox 7050---------------Netgear Switch-----------------MP101
-MP101 running 1.3.7
-MP101 RTP (<- very important) set in Twonky 4.4.6
-Radio and MP3 and Playlists, working flawless
No stops even if running whole day.
NSLU2 with Twonky 4.4.6----------Fritzbox 7050---------------Netgear Switch-----------------MP101
-MP101 running 1.3.7
-MP101 RTP (<- very important) set in Twonky 4.4.6
-Radio and MP3 and Playlists, working flawless
No stops even if running whole day.
-
- Posts:2
- Joined:Sun Nov 09, 2008 4:11 pm
- AV Hardware:a Thecus 5200 firmware 2.00.10 with a Twonkymediaserver Module 2.00.12
(i.e Twonkymedia Version 4.4.9) Netgear mp101 Phillips sl400i
TG100 Teac wap 5000
Re: Running MP101 with RTP Option?
Hi,
I´m running a Thecus 5200 firmware 2.00.10 with a Twonkymediaserver Module 2.00.12
(i.e Twonkymedia Version 4.4.9)
My netgear mp101 works really fine really fine since I did set it manually to the rtp option in the clients settings menue on the twonky server. Maybee a similar approach would help in my case with the steamium 400i described below, just he option is not offerd (jet?)
And just try various clients in the house, especially the Streamium 400i seems to be my current favourite under those U get relatively cheap , and run stable (I only use wired connections).
Just I do have the sms style problem (wich means there is no search)
Described in
http://www.twonkyforum.com/viewtopic.php?f=9&t=3956
.Also it is important to have the player and the server set to the same language.
The workaround described below works 4 me.
Hi,
the problem has finally been found.. It'll be fixed in v5 beta 2 or a maybe-to-be-released 4.4.6
version. A quick fix for all other twonky-media versions is:
Point your webbrowser to
http://<your-ip>:9000/rpc/set_option?uploadenabled=1
and restart the media server (e.g. with /rpc/restart).
By doing this, the "X_BrowseByLetter" capability of the Twonkymedia Server will also be enabled.
Now since i´m running a version higher than the one where the problem was supposed to be tackeld, i wander wether there is an option to put a commandline into my regular startuproutine (like in autostart) since I do have to restart the server quite often , especially since the system somehow does not accept the -1 value 4 continous monitoring of changes, but sets itself to 60 minutes….
I´d appreciate every hint.
Thanx a lot.
I´m running a Thecus 5200 firmware 2.00.10 with a Twonkymediaserver Module 2.00.12
(i.e Twonkymedia Version 4.4.9)
My netgear mp101 works really fine really fine since I did set it manually to the rtp option in the clients settings menue on the twonky server. Maybee a similar approach would help in my case with the steamium 400i described below, just he option is not offerd (jet?)
And just try various clients in the house, especially the Streamium 400i seems to be my current favourite under those U get relatively cheap , and run stable (I only use wired connections).
Just I do have the sms style problem (wich means there is no search)
Described in
http://www.twonkyforum.com/viewtopic.php?f=9&t=3956
.Also it is important to have the player and the server set to the same language.
The workaround described below works 4 me.
Hi,
the problem has finally been found.. It'll be fixed in v5 beta 2 or a maybe-to-be-released 4.4.6
version. A quick fix for all other twonky-media versions is:
Point your webbrowser to
http://<your-ip>:9000/rpc/set_option?uploadenabled=1
and restart the media server (e.g. with /rpc/restart).
By doing this, the "X_BrowseByLetter" capability of the Twonkymedia Server will also be enabled.
Now since i´m running a version higher than the one where the problem was supposed to be tackeld, i wander wether there is an option to put a commandline into my regular startuproutine (like in autostart) since I do have to restart the server quite often , especially since the system somehow does not accept the -1 value 4 continous monitoring of changes, but sets itself to 60 minutes….
I´d appreciate every hint.
Thanx a lot.