[Solved] Go through 2 router

[Memes11]

Hello,

My Qnap TS-109 is connected to mi first router (D-Link DIR-635). from this router, I then have a cable running to the second router (D-Link DIR-615, DHCP de-activated), then my PS3 is connected to the DIR-615. I can not see the server from my PS3, but if I plug th cable from DIR-635 in the PS3, there is no issue. What should I configure on the router 2 (DIR-615) to make it work?

Thanks

PS : I can not simply route the port to the PS3 as there are other Twonky client plugged on router 2. they all have the same issue.

[Memes11]

What is even crazier, is that, when I connect the PS3 wirelessly to the router2, it works, but wired, can not see the servers.

to summary

config 1
TS-109 ====== DIR-635 ========DIR-615 =======PS3
it works

config 2
TS-109 ====== DIR-635 ===============PS3
it works

config 3
TS-109 ====== DIR-635 ========DIR-615 ))) ((( PS3
it does not work

where :
====== : wired connection
))) ((( : Wifi connection


My other clients are not wifi enabled, so I still need to solve the problem.

Thanks

[Memes11]

OK, got it, the wireless was still as "Wireless Router", I switched it to "Access Point" and that's it.

So, if anybody else got the same issue, Disable DHCP is not enough, Wireless has to be putted in Access point too.