[INFO] Twonky Server 7.2.8 Web Interface Remote Access
- phibertron
- Posts:1566
- Joined:Sun Jan 30, 2011 5:52 pm
- AV Hardware:Hardware
========
WHS - HP Ex495
PS3
XBOX 360
iTouch - Gen 2 and Gen 3
PSP - 3000
Encoders
========
Handbrake
x264
ffmpeg
mencoder
Tagging
======
mp3tag
While working on 7.2.8 for something else, I stumbled upon this,
It looks like it possible to enable working remote access using twonky settings again
Im not sure when this started working again, probably in one of the 7.2.x versions
My solution prior to this is located here:
How to enable remote access for Twonky Server 7.2.x
http://twonkyforum.com/viewtopic.php?f=2&t=11402
note: Twonky 7.2.x Special Search Version 6 is my latest version
.
It looks like it possible to enable working remote access using twonky settings again
Im not sure when this started working again, probably in one of the 7.2.x versions
My solution prior to this is located here:
How to enable remote access for Twonky Server 7.2.x
http://twonkyforum.com/viewtopic.php?f=2&t=11402
note: Twonky 7.2.x Special Search Version 6 is my latest version
.
viewtopic.php?f=2&t=10627
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
- phibertron
- Posts:1566
- Joined:Sun Jan 30, 2011 5:52 pm
- AV Hardware:Hardware
========
WHS - HP Ex495
PS3
XBOX 360
iTouch - Gen 2 and Gen 3
PSP - 3000
Encoders
========
Handbrake
x264
ffmpeg
mencoder
Tagging
======
mp3tag
Re: [INFO] Twonky Server 7.2.8 Web Interface Remote Access
There are various topics on this forum about enabling remote access
Here is a summary of the settings involved to enable it
that are located in the twonkyserver.ini
Here is a summary of the settings involved to enable it
that are located in the twonkyserver.ini
# access to web config pages, 0 for denied, 1 for local only, 2 for open
enableweb=
# enable https remote connections
enabletls=
# http server port for remote access
httpremoteport=
# dynamic dns prefix for remote access, including http:// or https://
dyndns=
# enable remote access
remoteaccess=
# for protection of the web config pages
accessuser=
# for protection of the web config pages
accesspwd=
viewtopic.php?f=2&t=10627
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
- phibertron
- Posts:1566
- Joined:Sun Jan 30, 2011 5:52 pm
- AV Hardware:Hardware
========
WHS - HP Ex495
PS3
XBOX 360
iTouch - Gen 2 and Gen 3
PSP - 3000
Encoders
========
Handbrake
x264
ffmpeg
mencoder
Tagging
======
mp3tag
Re: [INFO] Twonky Server 7.2.8 Web Interface Remote Access
There should be no need to change this setting, by Default this setting = 2# access to web config pages, 0 for denied, 1 for local only, 2 for open
enableweb=2
note: If set to anything other than 2, remote access will not work
If one had to change it, either edit the twonkyserver.ini or use an rpc call to set it, server restart is required
Code: Select all
http://x.x.x.x:9000/rpc/set_option?enableweb=2
viewtopic.php?f=2&t=10627
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
- phibertron
- Posts:1566
- Joined:Sun Jan 30, 2011 5:52 pm
- AV Hardware:Hardware
========
WHS - HP Ex495
PS3
XBOX 360
iTouch - Gen 2 and Gen 3
PSP - 3000
Encoders
========
Handbrake
x264
ffmpeg
mencoder
Tagging
======
mp3tag
Re: [INFO] Twonky Server 7.2.8 Web Interface Remote Access
By Default this setting = 1# enable https remote connections
enabletls=1
Which means that it will only HTTPS connections will work
If you intend to use HTTP for remote access, it must = 0
NOTE: it appears the HTTPS isn't working as expected, so we are forced to use HTTP
If one had to change it, either edit the twonkyserver.ini or use an rpc call to set it, server restart is required
Code: Select all
http://x.x.x.x:9000/rpc/set_option?enabletls=0
viewtopic.php?f=2&t=10627
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
- phibertron
- Posts:1566
- Joined:Sun Jan 30, 2011 5:52 pm
- AV Hardware:Hardware
========
WHS - HP Ex495
PS3
XBOX 360
iTouch - Gen 2 and Gen 3
PSP - 3000
Encoders
========
Handbrake
x264
ffmpeg
mencoder
Tagging
======
mp3tag
Re: [INFO] Twonky Server 7.2.8 Web Interface Remote Access
By default this setting has no value, also by default the internal port for Twonky is 9000# http or https server port for remote access
httpremoteport=
so one cant use that for the remote access port
If one had to change it, either edit the twonkyserver.ini or use an rpc call to set it, server restart is required
Code: Select all
http://x.x.x.x:9000/rpc/set_option?httpremoteport=9090
viewtopic.php?f=2&t=10627
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
- phibertron
- Posts:1566
- Joined:Sun Jan 30, 2011 5:52 pm
- AV Hardware:Hardware
========
WHS - HP Ex495
PS3
XBOX 360
iTouch - Gen 2 and Gen 3
PSP - 3000
Encoders
========
Handbrake
x264
ffmpeg
mencoder
Tagging
======
mp3tag
Re: [INFO] Twonky Server 7.2.8 Web Interface Remote Access
By default this setting has no value# dynamic dns prefix for remote access, including http:// or https://
dyndns=
the value uses here is what is used in the links generated by twonky for remote access
NOTE: if enabletls=1, you must use https, if not use http
NOTE: since enabletls=1 isn't working correctly, enabletls=0 is needed
For example:
If you
If one had to change it, either edit the twonkyserver.ini or use an rpc call to set it, server restart is required
Code: Select all
http://x.x.x.x:9000/rpc/set_option?dyndns=http://myserver.dyndns.com
viewtopic.php?f=2&t=10627
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
- phibertron
- Posts:1566
- Joined:Sun Jan 30, 2011 5:52 pm
- AV Hardware:Hardware
========
WHS - HP Ex495
PS3
XBOX 360
iTouch - Gen 2 and Gen 3
PSP - 3000
Encoders
========
Handbrake
x264
ffmpeg
mencoder
Tagging
======
mp3tag
Re: [INFO] Twonky Server 7.2.8 Web Interface Remote Access
By default this setting has no value, meaning its not enabled# enable remote access
remoteaccess=
This must be set to = 1 for remote access to work
If one had to change it, either edit the twonkyserver.ini or use an rpc call to set it, server restart is required
Code: Select all
http://x.x.x.x:9000/rpc/set_option?remoteaccess=1
viewtopic.php?f=2&t=10627
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
- phibertron
- Posts:1566
- Joined:Sun Jan 30, 2011 5:52 pm
- AV Hardware:Hardware
========
WHS - HP Ex495
PS3
XBOX 360
iTouch - Gen 2 and Gen 3
PSP - 3000
Encoders
========
Handbrake
x264
ffmpeg
mencoder
Tagging
======
mp3tag
Re: [INFO] Twonky Server 7.2.8 Web Interface Remote Access
It is HIGHLY RECCOMENDED TO USE ONE when enabling remote access# for protection of the web config pages
accessuser=
If one had to change it one can use the web interface, or edit the twonkyserver.ini or use an rpc call to set it
Code: Select all
http://x.x.x.x:9000/rpc/set_option?accessuser=someusername
viewtopic.php?f=2&t=10627
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
- phibertron
- Posts:1566
- Joined:Sun Jan 30, 2011 5:52 pm
- AV Hardware:Hardware
========
WHS - HP Ex495
PS3
XBOX 360
iTouch - Gen 2 and Gen 3
PSP - 3000
Encoders
========
Handbrake
x264
ffmpeg
mencoder
Tagging
======
mp3tag
Re: [INFO] Twonky Server 7.2.8 Web Interface Remote Access
It is HIGHLY RECCOMENDED TO USE ONE when enabling remote access# for protection of the web config pages
accesspwd=
If one had to change it one can use the web interface, or edit the twonkyserver.ini or use an rpc call to set it
NOTE: this will ALSO affect the internal web interface access, sadly there is no way to separate the two
Code: Select all
http://x.x.x.x:9000/rpc/set_option?accesspwd=somepassword
viewtopic.php?f=2&t=10627
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
- phibertron
- Posts:1566
- Joined:Sun Jan 30, 2011 5:52 pm
- AV Hardware:Hardware
========
WHS - HP Ex495
PS3
XBOX 360
iTouch - Gen 2 and Gen 3
PSP - 3000
Encoders
========
Handbrake
x264
ffmpeg
mencoder
Tagging
======
mp3tag
Re: [INFO] Twonky Server 7.2.8 Web Interface Remote Access
NOTE: At present HTTPS is NOT working correctly, so we are forced to use HTTP, using this method
The following example is for HTTP remote access
The following example is for HTTP remote access
# access to web config pages, 0 for denied, 1 for local only, 2 for open
enableweb=2
# enable https remote connections
enabletls=0
# http server port for remote access
httpremoteport=9090
# dynamic dns prefix for remote access, including http:// or https://
dyndns=http://myserver.dyndns.com
# enable remote access
remoteaccess=1
# for protection of the web config pages
accessuser=myusername
# for protection of the web config pages
accesspwd=mypassword
Code: Select all
http://myserver.dyndns.com:9090
viewtopic.php?f=2&t=10627
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
- phibertron
- Posts:1566
- Joined:Sun Jan 30, 2011 5:52 pm
- AV Hardware:Hardware
========
WHS - HP Ex495
PS3
XBOX 360
iTouch - Gen 2 and Gen 3
PSP - 3000
Encoders
========
Handbrake
x264
ffmpeg
mencoder
Tagging
======
mp3tag
Re: [INFO] Twonky Server 7.2.8 Web Interface Remote Access
When it comes to time to put a port forward on your router
Do NOT port forward to 9000, that wont work as expected to
You SHOULD, use a port forward to whatever you set httpremoteport =
In the above example, it would be 9090
As for what external port on the router you choose to forward to 9090, that's up to you
Do NOT port forward to 9000, that wont work as expected to
You SHOULD, use a port forward to whatever you set httpremoteport =
In the above example, it would be 9090
As for what external port on the router you choose to forward to 9090, that's up to you
viewtopic.php?f=2&t=10627
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
- phibertron
- Posts:1566
- Joined:Sun Jan 30, 2011 5:52 pm
- AV Hardware:Hardware
========
WHS - HP Ex495
PS3
XBOX 360
iTouch - Gen 2 and Gen 3
PSP - 3000
Encoders
========
Handbrake
x264
ffmpeg
mencoder
Tagging
======
mp3tag
Re: [INFO] Twonky Server 7.2.8 Web Interface Remote Access
In regards to HTTPS not working
I was able to get it working, once I resolved a different issue
[BUG] Twonky Server Port number issue with 7.2.x and 7.3.x
http://twonkyforum.com/viewtopic.php?f=2&t=11710
I was able to get it working, once I resolved a different issue
[BUG] Twonky Server Port number issue with 7.2.x and 7.3.x
http://twonkyforum.com/viewtopic.php?f=2&t=11710
viewtopic.php?f=2&t=10627
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497
viewtopic.php?f=2&t=9353
viewtopic.php?f=2&t=9408
viewtopic.php?f=2&t=9416
viewtopic.php?f=2&t=9424
viewtopic.php?f=2&t=9364
viewtopic.php?f=2&t=9497