Please, help me enable twonkyserver to autostart on Linux Debian 10.
With included documents it is not clear how to make autostart.
Thanks in advance to everyone.
Twonky 8.5.1 / Debian 10 - how to enable autostart.
-
- Posts:3
- Joined:Wed Feb 26, 2020 10:27 am
- AV Hardware:Debian 10
Intel(R) Xeon(R) CPU E3-1240L v5 @ 2.10GHz
Re: Twonky 8.5.1 / Debian 10 - how to enable autostart.
Can someone give some advice?
I can start Twonky by hand, but cannot start it as service.
By Hand, it starts, but with a warning:
--------------------------------------------------------------------------
user@server:/usr/local/twonky# ./twonky.sh start
Starting /usr/local/twonky/twonkystarter ...
user@server:/usr/local/twonky#
For image conversion and scaling the TwonkyServer utilizes ImageMagick. For details on the license please see /usr/local/twonky/cgi-bin/convert-readme.txt
Twonky Version 8.5.1
Snapshot Twonky_8.5.1_20180521 TA:c5bd20adecfd43fcf30c90b1271d424f773c1060
Platform x86-64_gcc520_glibc222_2__twonkyforum-x86-64-glibc-2.22
No TLS-server certificate found in tls_server.pem! Will use built-in keys (this is insecure)! You have been warned ...----------------------------------------------------------------------------------------------------------------------
Why it ask for TLS-sertificate? I don't need that. It simple local home server in my appartment.
Ok, how can fix that? Where can I find instructions how to create this TLS-sertificate at my own. Is there any docs?
Next.
I've tried to make service: /usr/lib/systemd/system/twonky.service
------------------------------------------------------------------------------------
[Unit]
Description=Twonky Service
[Service]
Type=forking
ExecStart=/usr/local/twonky/twonky.sh start
ExecStop=/usr/local/twonky/twonky.sh stop
ExecReload=/usr/local/twonky/twonky.sh restart
User=... # obscured, here is a correct non root user that has access to folders: video, music, picture
[Install]
WantedBy=multi-user.target
------------------------------------------------------------------------------------
Pretty simple.
When I start it:
# systemctl start twonky
● twonky.service - Twonky Service
Loaded: loaded (/lib/systemd/system/twonky.service; disabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Fri 2020-02-28 13:03:13 +05; 4min 58s ago
Process: 10187 ExecStart=/usr/local/twonky/twonky.sh start (code=exited, status=13)
фев 28 13:03:11 vxlab.ru systemd[1]: Starting Twonky Service...
фев 28 13:03:11 vxlab.ru systemd[1]: twonky.service: Control process exited, code=exited, status=13/n/a
фев 28 13:03:13 vxlab.ru systemd[1]: twonky.service: Failed with result 'exit-code'.
фев 28 13:03:13 vxlab.ru systemd[1]: Failed to start Twonky Service.
What is wrong? Why "status=13"?
Thanks in advance.
I can start Twonky by hand, but cannot start it as service.
By Hand, it starts, but with a warning:
--------------------------------------------------------------------------
user@server:/usr/local/twonky# ./twonky.sh start
Starting /usr/local/twonky/twonkystarter ...
user@server:/usr/local/twonky#
For image conversion and scaling the TwonkyServer utilizes ImageMagick. For details on the license please see /usr/local/twonky/cgi-bin/convert-readme.txt
Twonky Version 8.5.1
Snapshot Twonky_8.5.1_20180521 TA:c5bd20adecfd43fcf30c90b1271d424f773c1060
Platform x86-64_gcc520_glibc222_2__twonkyforum-x86-64-glibc-2.22
No TLS-server certificate found in tls_server.pem! Will use built-in keys (this is insecure)! You have been warned ...----------------------------------------------------------------------------------------------------------------------
Why it ask for TLS-sertificate? I don't need that. It simple local home server in my appartment.
Ok, how can fix that? Where can I find instructions how to create this TLS-sertificate at my own. Is there any docs?
Next.
I've tried to make service: /usr/lib/systemd/system/twonky.service
------------------------------------------------------------------------------------
[Unit]
Description=Twonky Service
[Service]
Type=forking
ExecStart=/usr/local/twonky/twonky.sh start
ExecStop=/usr/local/twonky/twonky.sh stop
ExecReload=/usr/local/twonky/twonky.sh restart
User=... # obscured, here is a correct non root user that has access to folders: video, music, picture
[Install]
WantedBy=multi-user.target
------------------------------------------------------------------------------------
Pretty simple.
When I start it:
# systemctl start twonky
● twonky.service - Twonky Service
Loaded: loaded (/lib/systemd/system/twonky.service; disabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Fri 2020-02-28 13:03:13 +05; 4min 58s ago
Process: 10187 ExecStart=/usr/local/twonky/twonky.sh start (code=exited, status=13)
фев 28 13:03:11 vxlab.ru systemd[1]: Starting Twonky Service...
фев 28 13:03:11 vxlab.ru systemd[1]: twonky.service: Control process exited, code=exited, status=13/n/a
фев 28 13:03:13 vxlab.ru systemd[1]: twonky.service: Failed with result 'exit-code'.
фев 28 13:03:13 vxlab.ru systemd[1]: Failed to start Twonky Service.
What is wrong? Why "status=13"?
Thanks in advance.
Re: Twonky 8.5.1 / Debian 10 - how to enable autostart.
Hello!
Use
See: https://bbs.archlinux.org/viewtopic.php?id=151251
Use
Code: Select all
[Unit]
Description=Twonky service
After=syslog.target network.target
[Service]
Type=forking
ExecStart=/usr/local/twonky/twonkystarter
ExecStop=/usr/local/twonky/twonky.sh stop
PIDFile=/var/run/mediaserver.pid
[Install]
WantedBy=multi-user.target
-
- Posts:3
- Joined:Wed Feb 26, 2020 10:27 am
- AV Hardware:Debian 10
Intel(R) Xeon(R) CPU E3-1240L v5 @ 2.10GHz
Re: Twonky 8.5.1 / Debian 10 - how to enable autostart.
@waw555
Thank you very much!
That was really good advice. Everything is work now.
Thank you very much!
That was really good advice. Everything is work now.