Qnap TS-451 could not connect to server after firmware upgrade

Other OS or NAS discussions
Post Reply
Moocow
Posts: 2
Joined: Tue Oct 16, 2018 10:52 pm
AV Hardware: Qnap

Qnap TS-451 could not connect to server after firmware upgrade

Post by Moocow » Tue Oct 16, 2018 11:13 pm

Qnap TS-451
qnap firmware version:4.3.5.0728
Since updating I keep getting could not connect to server? I have tried deleting and re installing the qpkg. I also tried an older version 8.4 and still the same thing?
Am I missing something?

I have also tried rebooting the qnap server.

Thanks in advance.

Toxic17
Posts: 4
Joined: Sat Jan 10, 2015 2:46 am
AV Hardware: QNAP NAS

Re: Qnap TS-451 could not connect to server after firmware upgrade

Post by Toxic17 » Wed Oct 24, 2018 9:26 am

do you have two interfaces setup on you NAS with different IP addresses?

Perhaps Twonky is broadcasting on the other IP address/Interface. Usually the one with the Gateway assigned to it.

Moocow
Posts: 2
Joined: Tue Oct 16, 2018 10:52 pm
AV Hardware: Qnap

Re: Qnap TS-451 could not connect to server after firmware upgrade

Post by Moocow » Wed Oct 24, 2018 2:57 pm

Thanks for the reply.

My qnap has 2 adapters and Twonky was using Adapter 2 which was my gateway. I was able to force it over to adapter 1 and it seems to be working again.

Peace.

Post Reply